BROAN® Flex™ Series AE80K Bathroom Exhaust Fan, 120 V, 0.3 A, Steel Housing, Galvanized Housing
- UPC
- SKU
- 71526090
BROAN® Flex™ Series AE80K Bathroom Exhaust Fan, 120 V, 0.3 A, Steel Housing, Galvanized Housing
Note: In-store pricing and availability may vary. Bulk orders may be eligible for discount pricing. Please reach out to your Anawalt Lumber store for more information.
BROAN® 671 Bath Fan, 120 V, 1.15 A, 25 ga Steel, Galvanized
Nortek Global HVAC
BROAN® Flex™ Series A70L Bathroom Exhaust Fan, 120 V, 1.2 A, Steel Housing, Galvanized Housing
Nortek Global HVAC
BROAN® 678 Ventilation Fan, 120 V, 1.6 A, 26 ga Steel, Plastic, Galvanized
Nortek Global HVAC
BROAN® A80 Ventilation Fan, 120 VAC, 0.37 A, 26 ga Steel, Polymeric, Galvanized
Nortek Global HVAC
Description
The BROAN® Flex Series™ ventilation fan with CleanCover™ grille clears the air with a low profile, streamline design. Say good bye to unsightly standard grilles that catch dust and debris and can be a hassle to clean. With CleanCover™, your fan cover stays cleaner for longer with fewer vent slots to clean and design that coordinates with any decor. Designed for retrofit, remodel and replacement, this fan features hassle-free installation from the room side, for spaces with no attic access. The SnapFit flange kit, EzDuct™ connector and FoldAway™ mounting ears make it flexible to almost any installation challenge, especially for rooms on the first floor or basement floor of the home. Each carton comes complete with a precise template for accurate housing opening ceiling cut. The SnapFit flange kit provides a self-trimming finish to cover a rough cut.
Features
- Bathroom Exhaust Fan
- 80 cfm, powerful ventilation to remove moisture and reduce the risk of mold or mildew in most full baths
- 0.7 sones for whisper quiet operation
- BROAN® Flex Series™ ventilation fans easily install from the room side, which makes it possible to retrofit to spaces with no attic access
- CleanCover™ grille stays cleaner longer with fewer vent slots to collect dust
- FoldAway™ mounting ears precisely positioned the fan for new construction applications or fold flat for retrofit installations with no attic access
- EzDuct™ connector creates an air tight seal while connecting to the duct from below the ceiling
- 30% more airtight installed performance vs standard ventilation fans
- SnapFit flange kit offers flexible installation for new construction or retrofit upgrades
- 4 in duct connector with damper
- Fits 2 in x 6 in ceiling construction
- UL listed for use in insulated ceilings (type I.C.) and HVI-2100 certified for safety
- UL listed for use over bathtubs or showers when connected to GFCI protected branch circuit (not included)
- 3-Years limited warranty
- Comparable to NuTone model AERN80K
Additional Resources
Specifications
| Key | Value |
|---|---|
| Series | Flex™ Series |
| Voltage Rating | 120 |
| Amperage Rating | 0.3 |
| Frequency Rating | 60 |
| Power Rating | 24.5 |
| Mounting Type | Ceiling |
| Mounting Size | 2 x 6 |
| Grille Size | 12-1/4 in L x 12-1/4 in W |
| Duct Size | 4 |
| Motor Type | Plug-In, Permanently Lubricated |
| CFM Rating | 80 |
| Coverage Area | 75 |
| Noise Rating | 0.7 |
| Overall Length | 9-1/4 |
| Overall Width | 10 |
| Overall Height | 5-3/4 |
| Housing Material | Steel |
| Housing Finish | Galvanized |
| Housing Color | White |
| Manufacturer | Nortek Global HVAC |