If you’re looking to start a garden, but don’t have the space for a traditional garden plot, you may want to consider building a raised garden bed. A raised bed is simply a raised platform that you can use to grow plants in. It can be made out of many different materials, but in this blog post, we will be showing you how to build a raised bed out of wood.

You can have a raised garden bed on any size lot. We built ours 12 ft. x 3 ft., which was the perfect size for our side yard. The materials you’ll need are as follows:

  • 2 2×12 Boards
  • 2 2×12 Boards
  • Kellogg Garden’s Raised Bed & Potting Mix
  • 10 Bags of Quickrete 3/4″ Gravel
  • 4″ Exterior Screws
  • 4 Wood Stakes
  • String
  • Inverted Marking Paint
  • Flex Seal Spray
  • Thompson’s Water Seal
  • Large Paint Brush
  • Small Paint Pail

You don’t need a lot of tools for this project. Anawalt Lumber can cut your wood to length in-store, so some of the tools listed are optional. Here are the tools you will need:

  • Drill
  • Shovel (Preferably a trenching shovel)
  • Level (The longer, the better)
  • Tape Measure
  • Miter Saw (Optional)
  • Circular Saw (Optional)
  • Hand Saw (Optional)

Choose Your Spot for Your Raised Garden Bed

The perfect location for your garden can make all of the difference in what you grow and how successful it will be. The space we had was limited, but we were able to find a spot that will get sun exposure for at least half of the day, which will be enough for the herbs we are growing.

Measure and Mark Your Plot

Before you can start digging your trench for your raised bed, you need to measure and mark the area. Grab a tape measure and some stakes, and stake out the corners of your bed. We wanted our bed to be 18″ away from the fence, so there would be room to work on the side and back of the bed.

Once you have placed your stakes, wrap the string around each corner to outline your raised bed. Next, use inverted marking paint to mark the outline of your bed. Once you have done that, you can remove the stakes and string. Now you’re ready to start digging!

Dig Your Trench and Add Gravel for Drainage

Now that you have your outline, you need to dig a trench and add gravel for drainage. Using the paint outline as your guide, dig a trench that is 4″-6″ wide and 4″ deep. It’s not necessary to level the trench perfectly as you dig since you can fix that when you add the gravel.

Once you have finished digging, tamp down the ground to make it more compact. This will help to keep the area level and prevent it from settling too much over time. If the ground is already hard and compact, you may not need to do much tamping. Otherwise, you may need to put some effort into it.

Next, grab your bags of gravel and begin pouring them into the trench. Start with an even layer, then use your level to make adjustments as necessary. Once you have poured the gravel in to fill the trench and you are happy it is level, give it a little light tamping again to ensure it is flat for when you make your frame.

Create the Frame for Your Raised Garden Bed

It’s time to grab your 2x12s for the frame of your raised bed. If you had them cut to length at Anawalt, then you are ready to build the frame. If you chose to cut them yourself, then get your cutting tool of choice ready. The boards we bought were already 12 ft., so we didn’t need to cut those, but we needed to cut the boards for our sides. To make our raised bed 3 ft. long, we needed to cut our side pieces of wood to 32″ since we have to account for the 2″ board thickness.

Building the frame for your raised garden bed is a simple process, but it’s important to do it correctly to ensure that your bed is stable and will last for years to come. Start by grabbing two of your 2×12 boards and placing them together, with the shorter board on the inside of the longer board. Use screws to secure the two boards, making sure to insert them evenly spaced apart. Repeat this process until all four sides of your frame are complete.

Once your frame is assembled, double-check that is level, and make adjustments as necessary. Because it’s just a raised garden bed, we just want it to look square, but it doesn’t need to be perfectly square. When you’re satisfied that it’s square enough and level, you’re ready to seal the wood.

Seal Your Raised Garden Bed

Now that your raised garden bed frame is complete, it’s time to waterproof the wood. This will help to protect the wood from rot and weathering, and it will also make it easier to clean. We recommend using Flex Seal on the inside of your raised garden bed rather than a plastic liner because it’s much easier to install to achieve the same results.

Simply spray on a generous amount of flex seal, making sure to get into all of the corners and crevices. I over-sprayed the corners so it built up enough to create a good seal. Once you have applied flex seal to the entire interior surface of your raised garden bed, let it dry for about 15 minutes. After 15 minutes have passed, tap the Flex Seal with your finger to how much it has dried. It should feel tacky but none comes off and sticks to your fingers. If any comes off, let it continue to dry for 15 more minutes. 

With the interior waterproofed, it’s time to seal the exterior. We recommend using Thompson’s Water Seal because it will help to protect the wood from water damage and weathering, and it will look good. You can choose to use a water seal that has some tint or stain to it, but we liked the look of the clear coat.

Grab your paint pail or paint tray and pour some water seal into it. Using your paintbrush, apply a generous amount to the top and sides of the wood. Don’t worry if it runs onto the side with the Flex Seal.

Once you have applied the water sealer to all sides, leave everything to dry for 24 hours.

Add Soil and Plant

After your sealants have had time to dry, it’s time to add soil and plant your garden. You can either use potting mix or topsoil, but a straight potting mix can get quite expensive without providing too many benefits. We used Kellogg Garden’s Raised Bed & Potting Mix for our raised garden bed because it is organic, will provide our plants the nutrients they need, and it’s affordable.

Fill your raised bed with soil to 1 in. below the top. This helps to prevent soil from spilling over the sides when you are working in it.

And that’s it! You’ve now built a raised garden bed! We hope you found this blog post helpful and that you enjoy growing your very own vegetables, flowers, herbs, or whatever you want. We always love seeing photos of your gardens, so please share them with us on Facebook or Instagram. Happy gardening!

Share This